Getting started

== Getting started with your board

To get started you'll need the following: * a microUSB cable and a power supply * a microSD card loaded with the necessary firmware

You can connect additional expansion boards that can provide additional functionality, for example: * a AC-DC board so you can use the board directly from a mains line * a LCD board that can provide I/O

== Load firmware on the microSD

To flash an image on the card, you can either go for a prebuilt image, or consult the software section for advanced instructions and configuration.

== First boot [TBD]

== Next steps

Check the hardware and software section for in-depth overview of specific topics