Skip to content

Glossary

Terms used across Glasnost docs.

Term Meaning
Boot ROM Code built into the processor that runs first at power-up and looks for a bootloader on the boot media (microSD card, flash, …).
Bootloader Small program that prepares the board (memory, clocks) and starts the next stage. Glasnost boards use AT91Bootstrap or SPL, then U-Boot, then Linux.
Cape An add-on board that plugs onto a Glasnost board's header to add a function (PoE, LCD, GPS, …).
Debug console The serial port that shows boot messages and gives you a login prompt. You connect to it with a 3.3 V USB-to-serial adapter.
Device tree (DT) A file that tells Linux what hardware is on the board and how it's wired.
DNP "Do not populate": a part that has a place on the board but isn't fitted by default.
ESD Electrostatic discharge — a static zap; protection parts absorb it before it reaches the chips.
FEL / SAM-BA Recovery modes built into the processor (FEL on Allwinner, SAM-BA on Microchip): if no bootable media is found, the board waits for a PC to load software over USB or serial.
Gerbers The manufacturing files a PCB fab uses to make the bare board.
PMIC Power-management IC: one chip that makes several of the board's supply voltages and controls power-up order.
Rail One supply voltage on the board, e.g. the 3.3 V rail.
SDSC / SDHC microSD card types: SDSC (standard capacity, up to 2 GB) and SDHC/SDXC (larger). Some processors' boot ROMs only read SDSC.
U.FL A tiny coaxial connector for an external antenna.